Thermal Analysis and Mechanical Properties: 7 Resources found

MT DSC 3+.PNG
Differential Scanning Calorimeter 3+

Mettler Toledo DSC 3+



Located in Saab ETIC 114 1. Please purchase the amount of DSC 3+ Aluminum Crucibles necessary for the amount of tests you're running. 2. Training will be in 2 sessions; the first is 1 hour, the second will be 30 minutes prepping your method and your first sample. 3. 24 Carousel Autosampler 4. Temperature Range: -100°C to 450°C 5. Helpful with finding Tm (Melt Temperature), Tg (Glass Transition Temperature), and Tc (Crystallization Temperature). All new users can contact Violet Sullivan to discuss training at violet_sullivan@uml.edu. Additional pricing for academic and government groups is available upon request.


Industry Rates
Self:$63/hr
Service:$302/hr
Training:$302/hr
MT ALUMINUM CRUCIBLE.PNG
DSC 3+ Aluminum Crucible

Mettler Toledo

40 µL crucible with lid. Crucibles must be purchased for all DSC experiments.


Industry Rates
Special:$4/ea
DMA Image.PNG
Dynamic Mechanical Analyzer
TA Instruments Q800
Located in Saab ETIC 114 1. Available fixtures: Dual/Single Cantilever, 3-Point-Bend, Compression & Film Tension 2. The first training takes 1 hour for 1 fixture and each additional fixture is an additional 15 minutes. 3. Sample dimensions detailed in the attached document below. 4. Commonly, the DMA is helpful with finding Tg (Glass transition temperature), tan delta,and creep. If you have needs not listed here, please feel free to reach out for us to discuss. All new users can contact Violet Sullivan to discuss training at violet_sullivan@uml.edu. Additional pricing for academic and government groups is available upon request.
1 Document Available


Industry Rates
Self:$54/hr
Service:$293/hr
Training:$293/hr
General Lab Training
Level 2 Safety Training


MT TGA 2.PNG
Thermogravimetric Analyzer 2 - SF


Mettler Toledo TGA 2 (SF)

Located in Saab ETIC 114 1. Temperature Range: RT to 1100°C 2. Training will be in 2 sessions; the first is 1 hour, the second will be 30 minutes prepping your method and your first sample. 3. Re-usable alumina crucibles are provided. 4. Helpful with finding degradation temperature, mass loss, and residue (ash content). All new users can contact Violet Sullivan to discuss training at violet_sullivan@uml.edu. Additional pricing for academic and government groups is available upon request.


Industry Rates
Self:$63/hr
Service:$302/hr
Training:$302/hr
TMP Lab - Technical Assistance


Industry Rates
Service:$240/hr
Instron UTM Image.PNG
Universal Test Machine
Instron 4466
Located in Saab ETIC 114 1. 2kN Load Cell 2. Tension and Compression Fixtures 3. Training will be in 2 sessions; the first is 1 hour, the second will be 30 minutes prepping your method and your first sample. All new users can contact Violet Sullivan to discuss training at violet_sullivan@uml.edu. Additional pricing for academic and government groups is available upon request.
1 Document Available


Industry Rates
Self:$22/hr
Service:$264/hr
Training:$264/hr